General

This digitalSTROM application helps to activate e-mail notification. You can define to send an e-mail if somebody rings the doorbell or if the digitalSTROM panic button is pushed. During longer absence periods (e.g. during holidays) you can set up notification and get an e-mail when the light in the hallway is switched on.

Preconditions

The digitalSTROM configuration needs the e-mail setting to use the e-mail notification option.
You can set up the e-mail option as follows:

  1. Switch to 'Advanced View' in the digitalSTROM configurator
  2. 2. Select the 'System' tab.
  3. 3. Select the 'Mail Settings' menu.
  4. 4. Fill in the fields according to the information of your e-mail provider.
  5. 5. Click on 'Send Testmail'.
  6. 6. Check your mailbox and make sure you really received the test e-mail.
  7. 7. Save the settings with 'Apply'.

Overview of all notifications

In this view all existing messages with their trigger and conditions will be listed. In addition to the option of setting up and editing messages, you can also activate and deactivate them one by one without deleting the message completely from the system. The function 'Test Message' will immediately send the message for test purposes. Conditions will not be considered when testing.

Setting up and editing messages

First enter a name for your message.
Define the activity that should trigger the message in the 'trigger' tab. Various activities can serve as triggers:

Several activities (e.g. preset 1, 2 and 3) or clicks may also be selected together for triggering the same message. By holding the Ctrl-key on your keyboard you may select several presets at the same time.

The desired message is defined in the 'Message' tab..
Enter the addressee's e-mail into the receiver field. Enter a text in the subject line that helps you to find and sort messages in your mailbox. You may enter additional text in the body field.
The e-mail is a simple text message, therefore formatting is not possible.

Sending messages might be restricted by conditions. For example, a message might be sent during daytime only. The following conditions can be defined:

Messages will be sent only if all defined conditions are met.
Conditions are optional.

The settings on the message will be saved and activated by 'Save'.

Tips: